Basic Maintenance Knowledge; Types And Timing Of Maintenance - Roland VersaUV LEC2-300 User Manual

Basic Maintenance Knowledge

Types and Timing of Maintenance

To use this machine under its optimal conditions, it is important to perform the appropriate maintenance at the
appropriate times.
Regular Maintenance
These are the maintenance items that are required on a daily basis.
Timing
Before daily operations
During and after daily operations
When the discharged fluid is ready to
overflow
When dot drop-out or dot displacement
occurs
Once a month
Advanced Maintenance
These maintenance methods consume a large amount of ink. Thoroughly read the explanation, and then perform
the operation at the appropriate point in time.
Timing
When the white ink concentration
drops
When manual cleaning is not effective Eliminating uneven colors, dot drop-
Replacing Consumable Parts
These items are for replacement of consumable parts. Thoroughly read the explanation, and then perform the
operation at the appropriate point in time.
Timing
When a replacement message ap-
pears
When a cutting edge becomes dull
188
1. Introduction
Category
Maintenance of ink cartridges
Cleaning of the print heads
Cleaning of the print heads
Cleaning the machine
Replacing ink cartridges
Disposing of discharged fluid
Cleaning of the print heads
Cleaning the UV-LED devices
Category
Eliminating drops in ink concentration
out, and dot displacement
Category
Replacing consumable parts
• Wiper
• Felt wipers
• Blade
• Separating knife
P. 197「Maintenance of Ink Cartridges」
P. 197「Printing Tests and Normal Clean-
ing」
P. 202「Manual Cleaning Method」
P. 192「Cleaning the Machine」
P. 50「Replacing Ink Cartridges」
P. 195「If the Discharged Fluid Disposal
Message Appears」
P. 196「If the Drain Bottle Exceeds Its Ca-
pacity Limit」
P. 197「Printing Tests and Normal Clean-
ing」
P. 199「Medium Cleaning Method」
P. 200「Powerful Cleaning Method」
P. 202「Manual Cleaning Method」
P. 213「How to Clean the UV-LED Devi-
ces」
Item
P. 220「Light Choke Cleaning Method」
P. 224「Handling Severe Dot Drop-out, Dot Dis-
placement, and Uneven Colors」
Item
P. 230「Replacing the Wipers」
P. 233「Replacing the Felt Wipers」
P. 236「Replacing the Blade」
P. 241「Replacing the Separating Knife」
Item