Printing And Cutting Output; Step 1: Batch Settings For Printing And Cutting - Roland VersaUV LEC2-300 User Manual

Printing and Cutting Output

Step 1: Batch Settings for Printing and Cutting

Note that you can set all the items set here individually as well.
1.
Start the "MEDIA SETTING" menu.
Procedure
1.
Load the media.
Check that the media is not sagging. If any sagging exists, settings such as the correction values will not
function effectively.
2.
Press [MENU].
3.
Press [ENTER].
MENU
MEDIA SETTING
If you want to cancel the batch settings before they are completed, see the following page.
RELATED LINKS
・ P. 27 "Setup of Media"
・ P. 63 "Canceling Batch Settings before They Are Completed"
3. Printing and Cutting Method
81