Accurately Adjusting the Settings for Cutting with Crop Marks
Adjusting the Level of the Sensor for Reading Crop Marks According to the Media
When the sensor for reading crop marks is corrected, the correction value is stored. When using another media,
adjust the level of the sensor for reading crop marks, as the correction value may not match.
Procedure
1.
Press [MENU].
2.
Press [▲] to display the screen shown below.
MENU
CUTTING MENU
3.
Press [▶] once, and then press [▼] twice to display the screen shown below.
CUTTING MENU
CROPSENS CALIB.
4.
Press [▶], then [▼] to display the screen shown below.
CROPSENS CALIB
SENS LEVEL
5.
Press [▶] twice to display the screen shown below.
SENS LEVEL
+20%
6.
Press [▲] or [▼] to set the correction value.
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU] to go back to the original screen.
160
1. Optimizing the Output Quality
+20%