How To Clean The Uv-Led Devices - Roland VersaUV LEC2-300 User Manual

How to Clean the UV-LED Devices

IMPORTANT
Important notes on this procedure
• Before attempting this operation, remove any media.
• To prevent the print heads from drying out, finish this procedure in 10 minutes or less. A warning beep sounds after 10 minutes.
• The cloths, alcohol, and similar items used in cleaning are not included with the product.
When a warning beep sounds during cleaning
• A warning beep sounds 10 minutes after operation starts. Stop work, close all the covers, and then press [ENTER] to end the manual
cleaning mode. After that, restart the procedure from the beginning.
Anhydrous ethanol or isopropyl
alcohol
Do not perform cleaning immediately after printing has finished. (Wait approximately 15
CAUTION
minutes after printing has finished.)
The area around the UV-LED device is hot and may cause burns.
When using anhydrous ethanol or isopropyl alcohol, be sure to follow the product's usage
CAUTION
precautions.
Exercise caution regarding items such as fire, ventilation, and rashes.
Only use anhydrous ethanol or isopropyl alcohol.
CAUTION
Using chemicals (or similar substances) other than anhydrous ethanol or isopropyl alcohol may lead to
UV-LED device damage.
Use cloth that is not fluffy to wipe off the parts. Do not use a hard material such as metal.
CAUTION
Using cloth that is fluffy or a hard material such as metal may lead to UV-LED device damage.
Procedure
1.
Remove any media.
2.
Remove the media clamps.
3.
Press [FUNCTION].
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
CLEANING
MANUAL CL.
5.
Press [ENTER].
After "NOW PROCESSING.." is displayed, the screen shown below appears.
Also, the print head moves to the left end of the platen.
FINISHED?
IMPORTANT
Do not press [ENTER] at this stage. Press [ENTER] after the work is complete. If you press the [ENTER] key at this stage, wait for
the screen to change as shown in the following figure, and then press the [ENTER] key again.
CLEANING...
>>
Required items
Cloth (that is not fluffy)
01:45
Cleaning That Must Be Performed Once a Month or More
Rubber gloves
2. Regular Maintenance
213