Measures When The Printer Is Not In Use For A Prolonged Period - Roland VersaUV LEC2-300 User Manual

Basic Maintenance Knowledge

Measures When the Printer Is Not in Use for a Prolonged Period

Be sure to follow the instructions shown below when the printer is not in use for a prolonged period.
• Empty the drain bottle.
If you know that you will not use the machine for a prolonged period, empty the drain bottle. When the main
power is on, the machine periodically performs automatic maintenance in which fluid is discharged.
The drain bottle is filled when the following periods elapse. Leaving the drain bottle as-is will lead to the dis-
charged fluid overflowing.
• Approximately 2 weeks after the message "EMPTY DRAIN BOTTLE" is displayed
P. 195「If the Discharged Fluid Disposal Message Appears」
• Approximately 80 days after the drain bottle is emptied
P. 196「If the Drain Bottle Exceeds Its Capacity Limit」
• Switch the sub power on once every two weeks.
Switch the sub power on once every two weeks. When you turn on the power, the machine automatically per-
forms operations such as those to keep the print heads from drying out. Leaving the machine unused for a
prolonged period may damage the print heads, so be sure to switch on the power to perform these automatic
operations.
• Keep the machine at a constant temperature and relative humidity.
Even when the machine is not in use, keep it at a temperature of 5 to 40°C (41 to 104°F) and a relative humidi-
ty of 20 to 80% (with no condensation). Failure to do so may result in malfunction.
190
1. Introduction