Replacing Parts That Wear Out; Replacing The Wipers - Roland FLATJET FLJ-300 User Manual

3-4 Replacing Parts That Wear Out

Replacing the Wipers

TIME FOR
WIPER REPLACE
Press .
Be sure to follow the procedure exactly and only touch the specified locations.
CAUTION
Otherwise sudden movement of the machine may cause injury.
1.
Change to the print-head manual-cleaning mode.
MAINTENANCE
WIPER REPLACE
INSERT STOPPER
The wipers used when cleaning the print heads. When the screen displays a
message like the one shown, it means that the wipers need to be replaced.
Replace with new wipers.
Remove any media from the table and close the front cover.
Press the SERVO OFF to switch off the sub power.
F 1
F 2
F 3
F 4
F 5
F 6
Press the F5 button.
Check that the screen displays [MAINTENANCE MODE].
Press the SERVO ON to switch on the sub power.
F 1
F 2
F 3
F 4
F 5
F 6
Press
Press
When this screen appears, the printer is ready for mainte-
nance.
to select [WIPER REPLACE].
.
Chapter 3: Maintenance 47