Reducing Output Time; Speeding Up Output For Narrow Media - Roland VersaUV LEC2-300 User Manual

Reducing Output Time

Speeding Up Output for Narrow Media

This shortens output time by reducing the width of head movement to the minimum necessary. This is effective
when the width of the media or the output data is narrow.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
FULL WIDTH S
4.
Press [▶] to display the screen shown below.
FULL WIDTH S
FULL
5.
Press [▲] or [▼] to select "SHEET" or "OFF".
FULL WIDTH S
FULL
"SHEET"
"OFF"
"FULL"
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "FULL"
168
2. Optimizing Work Efficiency
FULL
OFF
"SHEET" matches the range of print head movement to the width of the media.
"OFF" matches the range of print head movement to the output data. Movement is limit-
ed to the minimum amount necessary, and this can be expected to yield the fastest out-
put. Note, however, that because the speed of media movement is no longer constant,
colors may be uneven.
"FULL" makes the speed of media movement constant at all times and produces the most
stable printing result.