How to Replace Consumable Parts
Replacing the Wipers and Wiper Cleaner
The wipers and wiper cleaner are consumables that you use when cleaning the print heads. They need to be re-
placed at appropriate intervals.
When the following screen is displayed, it is time to replace the wiper.
TIME FOR
WIPER REPLACE
CAUTION
IMPORTANT
• A warning beep sounds 10 minutes after operation starts. If the warning beep is heard, temporarily stop work, close the front cover,
and press [ENTER]. Quit the wiper replacement menu. After that, restart the procedure from the beginning.
• Be sure to hold the handle of the front cover and open and close it gently.
Wipers (2)
1.
Replace the wipers.
Procedure
1.
Press [ENTER] when the following screen appears.
TIME FOR
WIPER REPLACE
2.
Remove the object to be printed on.
3.
Press [MENU].
4.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
6.
Press [▶], then [▼] to display the screen shown below.
MAINTENANCE
REPLACE WIPER
7.
Press [ENTER].
222
4. Replacing Consumable Parts and Products
Be sure to perform operations as specified by the instructions, and never touch any area
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Included items
Wiper cleaner
Required items
Tweezers
Commercially available item
Cloth