Siemens SIMOTION Series Commissioning And Hardware Installation Manual page 85

Withdrawing the CFast card
To withdraw the CFast card, proceed as follows:
1. Release the lock of the cover. Push against the cover in the direction indicated.
Open the cover completely.
2. Remove the CFast card from the memory card slot by pushing it in until it is ejected by
about 5 mm (ball-point pen mechanism).
Then withdraw the CFast card from the memory card slot.
3. After removing the CFast card, close and lock the cover.
Inserting the CFast card
NOTICE
Inserting the CFast card
If you insert a CFast card into a built-in SIMOTION P320-4 in a system, observe the safety
regulations for working with electrical systems.
Insert the CFast card carefully into the slot, and without applying excess force.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
5.5 Withdrawing/inserting the CFast card
Mounting
85