Led Display - Siemens SIMOTION Series Commissioning And Hardware Installation Manual

Operator Control (hardware)
8.1 SIMOTION P state application
Figure 8-2
Note
The SIMOTION P State application is in English.
Generally, only English is supported on the SIMOTION P320-4, this also applies for the Win7
operating system.
8.1.2

LED display

Meaning of LEDs
The meaning of the LEDs and their colors is described in the table below.
LED display Meaning
SF Red Fault
RUN Green SIMOTION P320-4 in RUN
mode
STOPU Yellow SIMOTION P320-4 in the
STOP User Program
STOP Yellow SIMOTION P320-4 in STOP
mode
SF PN Red PROFINET bus fault
SY/MT Yellow Sync of the PROFINET inter‐
face
BUS1F Red Group fault
BUS2F Red Group fault
120
SIMOTION P State - PROFINET onboard and additionally with optional IsoPROFIBUS
board
Description
The fault state of the SIMOTION P320-4 is displayed.
The user program is running.
The technology packages (e.g. synchronous operation, cam) are ac‐
tive. Test and commissioning functions can be executed without a
user program.
The user program is not active.
There is no user program running.
The technology packages are not active.
A fault state is displayed on the PROFINET interface (X3).
It is displayed whether the PROFINET interface has been synchron‐
ized.
A fault state is displayed on the IsoPROFIBUS interface (X101).
A fault state is displayed on the IsoPROFIBUS interface (X102).
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016