Runtime Network Connections - Siemens SIMOTION Series Commissioning And Hardware Installation Manual

The following settings are possible:
● Enabled
An automatic restart of the SIMOTION P Runtime is performed at the start of the
SIMOTION P320-4 with withdrawn CFast card or for a CFast card withdrawn during
operation.
The automatic restart of the SIMOTION P Runtime for the Enabled default setting is
performed when the CFast card is inserted.
Figure 9-5
● Disabled
The automatic restart of the SIMOTION P Runtime is prevented after inserting the CFast
card.
Note
Behavior with withdrawn CFast card
Further information on the behavior of the SIMOTION P320-4 with withdrawn CFast card
can be found in Section Automatic restart of the SIMOTION P Runtime (Page 86).
9.3.4.3

Runtime Network Connections

The Ethernet interface of the SIMOTION P320‑4 is displayed here. It can be addressed via
the SIMOTION P Runtime.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
Administration tab - Automatic Restart By Plug-In External Memory Card
Parameter assignment/addressing
9.3 SIMOTION P control manager
133