Siemens SIMOTION Series Commissioning And Hardware Installation Manual page 125

Options menu
Options
Reset to factory default
Note
Station Configurator settings
Settings made with the Station Configurator are reset to the default values at the time of delivery
as well.
Further information
can be found in Section Defined states > Restore the factory settings using SIMOTION P
State (Page 169)
Info menu
Info
Hardware Version
Software Version
Info about SIMOTION P State
Note
The versions in the Info menu only become visible after the Windows power-up after the
SIMOTION P320-4 has been started once.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
Description
Restore the factory default.
This will delete the following data:
● The non-volatile SIMOTION data (retain data) in the SIMOTION
device
● The backup of the non-volatile SIMOTION data on the external
CFast card (PMEMORY.XML/PMEMORY.BAK)
● The user data from the "Volatile SIMOTION data" area (RAM) and
on the external CFast card (ROM)
● The communication configuration (IP and DP parameters) on the
external CFast card is set to the factory settings.
The licenses on the CFast card are retained.
Description
Display of the hardware information.
Display of the software versions.
Display of the SIMOTION P version.
Operator Control (hardware)
8.1 SIMOTION P state application
125