Under-Licensing; Boot Error Messages - Siemens SIMOTION Series Commissioning And Hardware Installation Manual

Hide thumbs Also See for SIMOTION Series:
Table of Contents

Advertisement

Alarm, error and system messages

12.7 Boot error messages

12.6

Under-licensing

Error
The red system error LED (SF) flashes at 0.5 Hz.
Cause
No license exists for technology/optional objects under license.
Licensing must be performed to correct the error.
Note
Further information for the licensing of technology/option objects can be found in the
SIMOTION SCOUT Configuration Manual.
12.7
Boot error messages
During power-up (the boot process), the BIOS first performs a Power On Self Test (POST)
and checks as to whether certain functional units of the PC are operating correctly. The boot
sequence is immediately interrupted if critical errors occur.
If the POST does not return an error, the BIOS initializes and tests further functional units. In
this startup phase, the graphics controller is initialized and any error messages are output to
the screen.
The following lists the error messages from the system BIOS. For information on error
messages output by the operating system or programs, refer to the corresponding manuals.
Error messages on the screen
Error message on the screen
Operating system not found
200
Meaning / suggestions
Possible causes:
● No operating system present
● Incorrect active boot partition
● Wrong drive settings in SETUP
Commissioning and Hardware Installation Manual, 11/2016
SIMOTION P320-4 E / P320-4 S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotion p320-4 sSimotion p320-4 e

Table of Contents