4-6
Confi gure the DeviceNet Scanner Subnet
Go On Line
After you set confi guration parameters, your scanner must go on line
to accept the confi guration changes. Follow these steps:
1. Use the Network pulldown to go on line.
1. Click on Network.
2. Click on Online.
The software prompts you to save your confi guration changes.
Click Yes.
2. Choose your scanner's network and apply the changes, as shown
below.
Select the DeviceNet
network subnetwork.
This selection accesses
the PointBus to configure
the adapter on the
DeviceNet network.
Click OK to apply the
data to your scanner.
Publication PSS-UM001A-EN-P – December 2016
Chapter Summary and What's Next
In this chapter, you learned how to confi gure the scanner.
Move to Chapter 5 to learn how to add the H Series
Fieldbus DeviceNet adapter to the DeviceNet scanner's
scanlist.