3-4
Use Auto Start Mode
Use RSNetWorx for DeviceNet
You must use the RSNetWorx for DeviceNet software to confi gure
your adapter.
Follow the steps below to use Auto Start Mode.
1. Go online in the software.
IMPORTANT
Auto Start Mode is only available when RSNetWorx for
DeviceNet is online.
A. Click on the Network
pull-down menu.
B. Choose Online.
2. Once you are online, browse for the primary network (e.g., You
can use Single Pass Browse).
A. Click on the Network
pull-down menu.
B. Choose a Browse type.
Publication PSS-UM001A-EN-P – December 2016
3. Click OK to synchronize your offl ine and online confi guration.
The adapter appears on the screen.
4. Double click on the adapter icon.
You can either:
• Upload confi guration from the device to update the software
• Download confi guration from the software to the device
5. Click Yes to upload confi guration from the device.