About Kwiklink Insulation Displacement Connectors (Idcs) - Parker H Series Installation & Service Instructions Manual

Description Catalog Number
NEMA 6P, 13; IP67 1485P-P1E4-R5
Micro module
w/base
NEMA 1; IP60 1485P-P1H4-R5
Micro module
w/base (no
gaskets)
Open-style module 1485P-P1H4-T4
w/base (no
gaskets)
KwikLink General 1485P-K1E4-R5
Purpose Connector,
1
Micro
1
Use this connector also with KwikLink General
Purpose Flat Cable (1485C-P1K).
CAN_H
V+
40 mm
(1.58 in.)

About KwikLink Insulation Displacement Connectors (IDCs)

KwikLink Insulation Displacement Connectors (IDCs) interface drop cables
and devices to the flat cable trunkline. The hinged, two-piece base snaps
around the flat cable at any point along the trunk. Contact is made with the
cable conductors by tightening two screws that drive the contacts through the
cable jacket and into the conductors. The snap-on interface provides the
connection to the drop cable and is available in micro-, open-, and
general-purpose style connectors.
Allen-Bradley KwikLink connectors are approved only with the following
DeviceNet flat cables:
Catalog Number Description
1485C-P1E CL1
1485C-P1L Aux. Power
1485C-P1G CL2
45 mm
CAN_L
(1.75 in.)
49 mm
(1.93 in.)
36 mm
(1.40 in.)
41711
Identify Cable System Components
45 mm
V-
(1.75 in.)
40 mm
(1.58 in.)
36 mm
(1.40 in.)
Publication DNET-UM072C-EN-P - July 2004
2-15
49 mm
(1.93 in.)
41717