About Terminators - Parker H Series Installation & Service Instructions Manual

2-22 Identify Cable System Components
Wire Wire Usage
Color Identity Round
white CAN_H signal
blue CAN_L signal
bare drain shield
black V- power
red V+ power
Description Catalog Number
Mini male 1485A-T1M5
Mini female 1485A-T1N5
Micro male 1485A-T1D5
Micro female 1485A-T1R5
Description Catalog Number
Open-style 1485A-C2
terminator
Publication DNET-UM072C-EN-P - July 2004

About terminators

Usage Electrically stabilize your DeviceNet communication with terminating
Flat
resistors.
signal
signal
IMPORTANT
n/a
power
power
Sealed-style terminators (round media)
Male and female sealed terminators have gold plated contacts for corrosion
resistance.
Unsealed-Style terminator (round and flat media)
IMPORTANT
An open-style terminator is suitable for use with:
• DeviceBox taps
• open-style plugs or taps
• KwikLink open-style Insulation Displacement Connectors (IDC)
You must terminate the trunk line on each end with a
121ohms, 1%, 1/4W or larger resistor.
mini style
male
female
You must connect these resistors directly across the blue
and white wires of the DeviceNet cable.
121ohms
41870
micro style
male
female
KwikLink IDC with
open-style terminator
41873