Set Up A Devicenet Network - Parker H Series Installation & Service Instructions Manual

1-4 Get Started
Set Up a DeviceNet
Network
1
Understand the
Media
refer to page 1-5
2
Terminate the
Network
refer to page 1-13
3
Supply Power
refer to page 1-15
4
Ground the Network
refer to page 1-22
5
Use the Checklist
refer to page 1-24
Publication DNET-UM072C-EN-P - July 2004
program. Refer to the online help accompanying RSNetWorx for
DeviceNet software for assistance in adding and configuring devices.
Once you have added devices, use either RSNetWorx for
DeviceNet software or the device's hardware mechanism to
commission a node for that device.
Use RSNetWorx for DeviceNet software to create and download a
scanlist to the master scanner.
6. How do I check system performance?
To obtain Rockwell Automation's off-line performance simulation
tools, visit www.ab.com and click on Support ⇒Knowledgebase
⇒DeviceNet Performance.
The following diagram illustrates the steps that you should follow to plan and
install a DeviceNet network. The remainder of this chapter provides an overview
and examples of each step.
1 Understand the Media
2 Terminate the Network
3 Supply Power
4 Ground the Network
5 Use the Checklist
Refer to page 1-5
Refer to page 1-13
Refer to page 1-15
Refer to page 1-22
Refer to page 1-24