Front Brake; Brake Pad Replacement - Honda CX500 1978 Shop Manual

HONDA
CX500
'82 ADDENDUM
.-
6. FRONT BRAKE
SPECIFICATIONS
I
ITEM
I
STANDARD
I
BRAKE PAD REPLACEMENT
Disc plate thickness
Disc plate runout
Master cylinder I.D.
Master piston O.D.
Caliper piston O.D.
Caliper cylinder I.D.
Remove the lock bolt and the pin retainer.
5 mm (0.20 in)
15.870-1 5.91 3 mm (0.6248-0.6245 in)
15.827-1 5.857 mm (0.6231 -0.6243 in)
30.148-30.149 mm (1.1 869-1.1 889 in)
30.230-30.280 mm (1.1 90-1.1921 in)
Slowly press the caliper against the disc to
push the pistons back into their cylinders. This
is necessary to make room for the increased
thickness of the new ads.
Remove the caliper mounting bolt.
Remove the caliper shaft and brake caliper.
SERVICE LIMIT
4 mm (0.1 6 in)
0.3 mm (0.01 in)
15.925 mm (0.6270 in)
15.81 5 mm (0.6226 in)
30.140 mm (1.1866 in)
30.290 mm (1.1925 in)
Date of Issue: September 1981
@American Honda Motor Co., Inc. 1981
-
All Rights Reserved