HONDA
F R O N T WHEELISUSPENSION
cx500
HEADLIGHT
HEADLIGHT CASE REMOVAL
Remove the headlight and disconnect all wires
at their couplers and connectors.
NOTE
1
Hold the connectors with pliers to
1
1
orevent the wires from beincl cut.
I
Remove the two fork top bridge bolts and
remove the headlight case.
WIRING CONNECTION IN
HEADLIGHT CASE
Route the wires into the headlight case through
the headlight case hole.
Connect the wires color-to-color.
Set each coupler in its correct holder in the
headlight case.
WIRING (Section
1).
HEADLIGHT INSTALLATION
Place the headlight upper hook over the head.
light case and secure the headlight with two
lower screws.
Check the headlight aim and adjust by screws
(A), ( B )
if necessary.
NOTE
Check each component for operation
after assembling.
Date of Issue: January, 1978
13-2
OHONDA MOTOR CO., LTD.