Honda CX500 1978 Shop Manual page 125

HONDA
@
cx500
SERVICE INFORMATION
SERVICE INFORMATION
TROUBLESHOOTING
GEARSHIFT LINKAGE REMOVAL
FINAL SHAFT DISASSEMBLY
FINAL SHAFT ASSEMBLY
TRANSMISSION DISASSEMBLY
TRANSMISSION ASSEMBLY
GEARSHIFT LINKAGE INSTALLATION
WORKING PRACTICE
Before reassembling, lubricate the M4 and M5 gears with molybdenum disulfide grease (MOLYCOAT 321) or an equivalent.
Apply engine oil t o the other gears.
SPECIAL TOOLS
. -
Special tools
CRANK CAP DRIVER
(for damper spring compressor)
BEARING REMOVER (20 mm)
BEARING REMOVER HANDLE
BEARING REMOVER WEIGHT
BEARING DRIVER ATTACHMENT
BEARING DRIVER HANDLE
BEARING DRIVER ATTACHMENT
BEARING DRIVER ATTACHMENT
BEARING DRIVER HANDLE
BALL RACE REMOVERIDRIVER
Common tools
BEARING DRIVER 142 x 47 mm)
BEARING DRIVER PILOT (20 mm)
-
BEARING DRIVER HANDLE ( A )
BEARING DRIVER (52
x
55 mrn)
BEARING DRIVER PILOT (25 mm)
Date of Issue: January, 1981
O HONDA MOTOR CO.. LTD.
1 1 - 1