HONDA
FRONT WHEELISUSPENSION
INSTRUMENTS
CLUSTER DISASSEMBLY
Remove the headlight. Disconnect the meter
cables and each applicable wire harness coupler.
Separate the meters from the meter panel by
removing the two nuts.
The meter lamps can be replaced under the
above condition.
INDICATOR LAMP REPLACEMENT
After installing a new bulb, check for con-
tinuty. I f the bulb does not light, inspect
the wiring for open or short circuits.
METER DISASSEMBLY
-
To replace a meter, it is necessary t o separate
the cluster.
Remove the set plate and cable
METER ASSEMBLY
Connect the water temperature gauge wires as
shown.
.-.
NOTE
I
Install the meter seal rubber properly.
\
ALL
12 V 3.4
W
I 2
cp)
Date of Issue: January,
1978
OHONDA MOTOR CO.. LTD.