HONDA
CX500
REAR WHEELIBRAKEI
FINAL DRIVEISUSPENSION
SWING ARMIPROPELLER SHAFT
INSTALLATION
Install the fork pivot nut from the inside.
Install the right pivot in the bearing inner.
Install the brake torque link on the swing arm.
Insert the propeller shaft through the swing arm
and install the boot.
NOTE
Make sure that the right pivot oil seal i s
installed properly.
1.5-2.3 kgm (11-17
ft-lbs)
Date
of Issue: January,
1978
OHONDA MOTOR CO., LTD.
14-27