COOLING SYSTEM
Remove the cap nut, copper washer and impel-
ler.
Remove the starter motor.
Remove the rear cover bolts.
Remove the rear cover.
NOTE
Inspect the impeller for wear or damage.
R MOTOF
Drive the mechanical seal out from the in
NOTE
Avoid damaging the rear cover whe
driving the seal out.
Inspect the mechanical seal for damag~
-.
evidence of dererioration.
WATER PUMP ASSEMBLY
Apply a thin coat liquid sealant t o the outer-
periphery of the mechanical seal.
NOTE
Check that the water pump drain hole
is
clear.
9-6
Date of Issue: January, 1978
OHONDA MOTOR CO., LTD.