Honda CX500 1978 Shop Manual page 332

HONDA
cxsoo
'82 ADDENDUM
Remove the collar and boot,
Remove the pad spring.
Place a shop towel over the pistons and
position the caliper with the pistons down.
Remove the pistons by applying a small amount
of air pressure t o the fluid inlet.
,
Do not use high pressure air or bring the
nozzle too close to the inlet.
Examine the pistons and cylinders for scoring
or scratches and replace if necessaly.
Remove the oil seals from the cylinders as
shown.
Clean the caliper grooves with brake fluid.
Date of Issue: September 1981
@American Honda Motor Co., Inc. 1981
-
All Rights Resewed