HONDA
CX500
'82 ADDENDUM
CALIPER BRACKET INSPECTION
Remove the dust cover from the caliper bracket
and check it for damage.
Check that the caliper bracket plate is correctly
seated on the bracket.
If necessary, cement the plate to the brackei
with Loctite 601 or an equivalent Cement.
CALIPER INSTALLATION
Install the brake pads and the caliper.
Tighten the caliper mount bolt and caliper shaft
to the specified torque.
TORQUE:
CALIPER MOUNT BOLT: 2.0-2.5 kg-m
(14-18 ft-lb)
CALIPER SHAFT: 2.5-3.0 kg-m
(18-22 ft-lb)
Connect the brake hose.
Fill the brake fluid reservoir and bleed the front
brake system (see page 3-10).
Date of Issue: September 1981
@American Honda Motor Co., Inc. 1981
-
All Rights Reserved