Honda CX500 1978 Shop Manual page 163

HONDA
FRONT WHEEL/SUSPENSION
speedometer gearbox.
Remove the cotter pin
FRONT WHEEL
FRONT WHEEL REMOVAL
Raise the front wheel off the ground by placing
a block or safety stand under the engine.
Disconnect the speedometer cable from the
and loosen the axle nut.
Remove the axle holder from the fork end
Withdraw the axle and remove the wheel.
removing the front wheel. To do so will
cause difficulty in refitting the brake disc
AXLE INSPECTION
Set the axle in V blocksand measure the runout.
The actual runout is
112
of TIR (Total Indicator
Reading).
SERVICE
LIMIT:
0.2 mm 10.008
in.)
Date of Issue: January,
1978
OHONDA MOTOR CO.. LTD.
13-5