Connecting Rob Removal - Honda CX500 1978 Shop Manual

HONDA
CXSOO
CRANKSHAFTIPISTON
CONNECTING ROD REMOVAL
V T
w w
=@r
- 3
VXcZx
"^W
Remove the cylinder head (Page
6-3).
Remove the oil pump (Page 7-8).
Remove the transmission (Page 11-41,
Scrape all deposits from the top of the cylinder.
I
i
Turn the crankshaft so that the piston to be
removed is
a t
B.D.C. (Bottom Dead Center).
Remove the bearing cap.
Mark the bearing caps and rods t o indicate
cylinder position.
Remove the left side cap from the transmission
side. Work through the hole on the oil pump
side to remove the right side cap.
Turn the crankshaft so that the piston
is at
T.D.C.
Place the PISTON REMOVER over the rod
bolts, and push the piston and rod assembly
-
out.
i - -
L ,
I
I
i
Date of Issue: January, 1978
OHONDA MOTOR CO., LTD.
12-3