Honda CX500 1978 Shop Manual page 201

HONDA
CX500
REAR WHEELIBRAKEI
FINAL DRIVEISUSPENSION
REAR FORK/PROPELLER SHAFT
SWING ARM/PROPELLER SHAFT
REMOVAL
Remove the rear wheel. (Page 14-31
Remove the final gear case. (Page 14-12)
Slide the boot backward and remove the
propeller shaft joint bolt.
Remove the propeller shaft from the engine.
Remove the left shock absorber.
p z z q
I
Pump grease into the final gear case
1
through the grease nipple whenever the
propeller shaft is removed from the en-
pine.
Remove the swing arm pivot bolt from the left.
Free the drain tube, etc. from the clamps.
Remove the right pivot.
Remove the swing arm and propeller shaft.
Date of Issue: January, 1978
OHONDA MOTOR CO., LTD.
14-23