YASKAWA VS-606V7 Series Instruction Manual page 32

Description of Status Indicator LED's
There are two LED's on the middle right section of the face of the VS-606V7. The
inverter status is indicated by various combinations of ON, BLINKING and OFF
LED's. RUN indicator and status indicator of the
functions.
For details on how the status indicator LED's function at inverter faults, refer to
Section 8 "FAULT DIAGNOSIS AND CORRECTIVE ACTIONS" on page 126. If a
fault occurs, the ALARM LED lights.
The fault can be reset by turning ON the fault reset signal (or pressing key
NOTE
on the digital operator) with the operation signal OFF or by turning OFF the
power supply. If the operation signal is ON, the fault cannot be reset by the fault
reset signal.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RUN button have the same
STOP
RESET
31