YASKAWA VS-606V7 Series Instruction Manual page 123

Inverter Capacity Display
The voltage class and maximum applicable motor capacity (whose parameters stored in
the digital operator are read out) is displayed.
[Example] Display the voltage class and maximum applicable motor capacity
for the inverter whose parameters stored in EEPROM inside the digital
operator.
• Enable the setting of the
parameters n001 to n179.
• Execute Inverter Capacity
Display (vA) by parameter copy
function selection (n176)
The following shows the explanation of Inverter Capacity Display
Voltage class
2 Three-phase 200V
b Single-phase 200V
4 Three-phase 400V
122
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Explanation
• Press DSPL to light [PRGM].
• Press ENTER to display the set (Can be a different parameter No.)
value. ( Lit )
• Change the set value to 4 by
(Can be a different set value.)
pressing or key. (Blinks)
• Press ENTER.
(Lit for one second.)
(The parameter is
displayed)
• Change the parameter No. to
n176 by pressing or key.
• Press ENTER to display the set
(Lit)
value.
(Lit)
• Change the set value to vA by
(Lit) (For20P7)*
pressing or key.
• Press ENTER.
(The parameter No. is
• Press DSPL or ENTER.
displayed.)
Max. applicable motor capacity
200V class
0.1 0.1kW
0.2 0.25kW
0.4 0.55kW
0.7 1.1kW
1.5 1.5kW
2.2 2.2kW
3.0
4.0 4.0kW
Operator display
400V class
-
0.37kW
0.55kW
1.1kW
1.5kW
2.2kW
- 3.0kW
4.0kW