YASKAWA VS-606V7 Series Instruction Manual page 122

VERIFY function
Collates the parameters stored in the digital operator with the parameters in the
inverter. As well as write-in, VERIFY is possible only for the inverters with same
product series, power supply specifications and control mode (V/f control or vector
control).
When the parameters stored in the digital operator correspond to those in the inverter,
vFy is displayed by blinking, then End is displayed.
[Example] Collate the parameters stored in EEPROM inside the digital operator
with the parameters in the inverter.
• Enable the setting of the
parameters n001 to n179.
• Execute VERIFY by Parameter
Copy Function selection (n176)
• Display the unmatched
parameter No.
• Display the parameter value in
the inverter.
• Display the parameter value in
the digital operator.
• Continue the execution of
VERIFY.
While an unmatched parameter No. is displayed or a parameter value is displayed,
pressing STOP/RESET interrupts the execution of VERIFY and End is displayed.
Pressing DSPL or ENTER returns to the parameter No.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Explanation
• Press DSPL to light [PRGM].
(Can be a different parameter No.)
• Press ENTER to display the set
( Lit )
value.
(Can be a different set value.)
• Change the set value to 4 by
(Blinks)
pressing or key.
• Press ENTER.
(Lit for one second.)
(The parameter is
displayed)
• Change the parameter No. to
n176 by pressing or key.
(Lit)
• Press ENTER to display the set
value.
(Lit)
• Change the set value to vFY by
pressing or key.
(Blinks while executing
• Press ENTER.
VERIFY)
unmatched)
(Blinks)
• Press ENTER.
(Blinks)
• Press ENTER.
(Blinks while executing
• Press key.
VERIFY
(End is displayed after the
• Press DSPL or ENTER
execution of VERIFY is completed.)
(The parameter No. is
displayed.)
Operator display
(Blinks) (When n001 is
121