YASKAWA VS-606V7 Series Instruction Manual page 124

Software No. Display
The software No. (of the inverter whose parameters stored in the digital operator are
read out) is displayed.
[Example] Display the software No. of the inverter whose parameters stored in
EEPROM inside the digital operator.
• Enable the setting of the
parameters n001 to n179.
• Execute Software No. Display
(Sno)* by Parameter copy
function selection (n176)
* Displays Lower 4 digits of the software version.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Explanation
• Press DSPL to light [PRGM].
• Press ENTER to display the set
(Can be a different parameter No.)
value.
( Lit )
• Change the set value to 4 by
(Can be a different set value.)
pressing or key.
(Blinks)
• Press ENTER.
(Lit for one second.)
(The parameter is
displayed)
• Change the parameter No. to
n176 by pressing or key.
• Press ENTER to display the set
(Lit)
value.
• Change the set value to Sno by
(Lit)
pressing or key.
• Press ENTER
• Press DSPL or ENTER
(software version: VSP010013)
(The parameter No. is
displayed)
Operator display
123