Approvals; Access Control Interface Unit - ADT FOCUS 200 PLUS Installation And Setup Manual

RF Gateway
Dimensions
Temperature Range
Gateway Circuit Power Requirement
Worst Case Voltage @ Gateway
Tamper
Control Unit
SIM Gateway
PID Gateway
Operating Panel
Printer Interface Unit

Approvals

The FOCUS 200 PLUS System has been approved by the following agencies for listing:
•
Underwriters Laboratories Inc. (UL)
•
Federal Communications Commission (FCC)
•
Factory Mutual (FM)
•
California State Fire Marshall
•
Underwriters Laboratories of Canada (ULC)
The FOCUS 200 PLUS System complies with UL609, UL611, UL864, UL985, UL1023, UL1610,
UL1635, NFPA71, and NFPA72, and will be submitted for approval to various European agencies.

Access Control Interface Unit

Electrical/Mechanical Specifications
The 472270 Access Control Interface Unit is designed to meet the following specifications:
Size
Housing
Operating temperature range
Power required
Max. cable distance to reader/strike
Max. current to strike
Approvals for the ACIU
The Access Control Interface Unit has been approved by the following agencies for listing:
•
Underwriters laboratories Inc. (UL)
•
Federal Communications Commission (FCC)
•
Factory Mutual (FM)
•
California State Fire Marshall
•
Underwriters Laboratories of Canada (ULC)
The FOCUS 200 PLUS System complies with UL294 (Access), UL864 (Fire), UL1635 (DACT), UL1076
(Proprietary), UL1610 (CCC), and NFPA72, and will be submitted to various European agencies.
(End of Standby Period)
Nominal operating voltage
(End of Standby Period)
Standby battery
4.25" H x 6.44" W x 1.25" D
° ° ° °
32 F (0 C) to 120 F (49
50mA
12.1VDC
8.4VDC
Cover included (pry-off kit available for UL listing)
Cover
Cover (ordered separately)
Cover and pry-off
Cover and pry-off
7-1/4" x 4-1/4" (18.4cm x 10.8cm)
472852 Housing Unit
° ° ° °
32 F (0 C) to 120 F (49
12.5VDC @ 60mA (includes float charge for standby battery)
12VDC
8.5VDC
12VDC, 0.8AH
150 feet
550mA
Section 21 – Specifications
C)
C).
21-3