Permanent Schedules - ADT FOCUS 200 PLUS Installation And Setup Manual

FOCUS 200 PLUS Installation and Setup Guide
User Access Limitations
Users are assigned privilege levels, which either allow or deny access to a BA group when it is normally
closed. The privilege of entering a BA group outside of the schedule can be assigned to any ID code.
Anyone who does not have this privilege and uses their ID code to access a BA group prior to the
scheduled open time will cause an Irregular Opening. The signal will be received at the CCC and the
owner or manager will be notified.
Close Time Timer
The Close Time Timer counts down from the opening of a BA group until closing. The system transmits
to the CCC a No-Close signal if the group is not closed when the countdown is completed.

Permanent Schedules

The permanent schedule has two open and close times that can be programmed for each day in the
week. The times can be changed only by someone who has an ID code with the privilege to change a
permanent schedule. This privilege also permits a person to make changes in real time.
Permanent Schedule Programming Options
Permanent schedule programming options are for establishing the daily opening and closing schedules
and for determining if changes will be permitted.
The permanent schedule programming options are as follows:
Schedule Option
Permanent
Open Time
Permanent
Close Time
Example of a Permanent Schedule
A facility is closed on Sunday, and is scheduled to open at 9:00 PM on Monday and close at 1 AM on
Tuesday. The table below shows the programming to establish this schedule for an entire week:
Day of Schedule
Monday First
Opening Time
Monday First
Closing Time
Tuesday First
Opening Time
Tuesday First
Closing Time
Tuesday Second
Opening Time
15-2
Description
00:00 to 23:59 The time range for selecting a permanent opening time in
hours and minutes.
UUUU There will not be a permanent opening schedule for the BA
group, although a temporary opening schedule can be used.
NNNN No permanent open time is assigned, nor can a temporary
schedule be entered via keypad.
00:01 to 23:44 The time range for selecting the scheduled closing time in
hours and minutes. A closing time between 11:45 PM and
11:59 PM is not permitted.
UUUU No permanent closing schedule is assigned, but a temporary
closing schedule can be used when necessary.
NNNN No permanent close time has been assigned, nor can one be
entered via the keypad.
Programming
Result
Entry
21:00 PM This starts the open period time window (9:00 PM) for
Monday.
UUUU This inhibits "close reminder/warning" and "no close" from
occurring because the premises will not close on Monday.
12:00 AM This entry is needed because the open time period was
started on Monday and allows any closing time to be entered
for Tuesday.
01:00 AM This completes the time window that started at 9:00 PM on
Monday.
21:00 PM This starts the open period time window (9:00 PM) for
Tuesday.