Installing The Operating Panels; About The Operating Panels - ADT FOCUS 200 PLUS Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

About the Operating Panels

Installing the Operating Panels

Addressing the Operating Panels
Operating Panel Programming Mode
Adjusting the Contrast Level
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
About the Operating Panels
The FOCUS 200 PLUS system is controlled via a user-friendly operating panel. The system supports
up to 16 operating panels. The operating panel provides:
•
An interactive 19-character four-line LCD (17 characters per line) display that operates in a
manner similar to an automatic teller machine (ATM).
•
A numeric keypad similar to one on a TouchTone phone.
•
An internal sounder, which annunciates for various situations, such as alarms, troubles, during
entry/exit delay, and whenever a key is pressed.
One operating panel can control all BA groups. Multiple operating panels will usually be needed in
installations:
•
Involving two or more BA groups with separate entrance/exit paths.
•
Where an operating panel must be installed inside of a separately protected area within the
premises.
•
Where an operating panel is used in conjunction with an access point.
Operating Features
The operating features of the operating panel are as follows:
•
Menus are employed to guide the user through the various operating procedures.
•
Menu items and other selectable choices are shown on the screen with an arrow (>) that lines up
with one of the four selector buttons on each side of the screen.
•
Help screens are available to assist the user in operating the system.
•
The display screen and the numeric keypad become illuminated when any key is pressed. This
enables the operating panel to be used in dark or dimly lit areas.
•
The customer can use the operating panel to change certain programming such as descriptors,
access codes, privilege levels, and permanent, temporary, and holiday schedules.
•
The operating panel performs an automatic self-test whenever power is applied. If it passes the
power-on test, it will emit a single beep, flash the backlight, and display the following message:
ADT INTERACTIVE KEYPAD WAITING FOR COMM.
Installing the Operating Panels
S E C T I O N 3
3-1