Table of Contents
Advertisement
Programming
Initializing the control panel
Important
Initializing the control panel resets all values to the factory default settings.
All changes are lost.
Only execute this option if you really want to return to the factory settings.
1. Tap the
The control panel is completely reset to the factory default settings.
Updating the control
Information
The latest software version is available in the download area at www.du-
erkopp-adler.com.
You can easily transfer a new software version from a USB key to the
control.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler using the part
number 9805 791113.
To perform an update of the control:
1. Switch off the machine.
2. Insert the USB key into the USB port (1) on the operating terminal.
Fig. 111: Updating the control
(1) - USB port
Service Instructions 911-211 - 02.0 - 10/2016
Initialisierung des Bedienfelds
(Initialize control panel)
①
option.
140
Advertisement
Table of Contents
