Setting The Needle Guide - DURKOPP ADLER 911-211 Service Instructions Manual

Fig. 28: Setting the needle guard
(1) - Needle guard
(2) - Screw
To set the needle guard:
1. Press and turn the hand crank and check how far the needle guard (1)
2. Turn the screw (2) such that the needle guard (1) just pushes the

4.4.5 Setting the needle guide

Order
First, check the following setting:
• A straight and undamaged needle has to be inserted ( Operating
Proper setting
1. Machine locked in place at position 1 ( p. 28).
 The needle guard pushes the needle just enough away so that it can-
41
①
②
pushes the needle (3) away.
needle (3) far away enough so that it is not touched by the hook tip:
• for pushing away more: Turn counterclockwise
• for pushing away less: Turn clockwise
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch off the machine before you check and set
the needle guide.
Instructions)
not be touched by the hook tip.
③
(3) - Needle
Service Instructions 911-211 - 02.0 - 10/2016
Machine head