Programming
Setting the stroke position
To set the stroke position:
1. In the menu item
The following options are displayed:
2. Tap the desired symbol and execute the function.
Service Instructions 911-211 - 02.0 - 10/2016
Extras
Hublage einstellen (Set stroke position)
Setting the stroke position
Symbol
Meaning
Perform a reference run
Check the movement
Switch between a hopper and presser foot
Switch over the mode of operation
Move to position
Set the sewing foot height
Switch off the power to the drives
Manually check the freedom of motion of the sewing foot rod
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do not reach into the machine when setting the
stroke position.
Switch off the power to the drives when you wish to
test the freedom of motion of the sewing foot rod.
Service
>
Multitest
>
tap the
option.
136