Table of Contents
Advertisement
Programming
Defining the starting point
2. Define the starting point:
Method
With the arrow buttons (3)
Attention
For safety reasons you cannot choose positions over 90,1
oder -92,6 on the Y-axis with the arrow buttons (3).
For adjustments in excess of these coordinates you must
use the pedal.
With the pedal
Each pedal step moves the cursor by 0,1 in the direction of
the chosen axis (X or Y)
Insert the coordinates directly by the cursor postion (1)
3. Tap the OK (4) button.
The desired starting point is adopted and marked with a green dot.
Selecting the line type
4. Use the line selection buttons (8) to select the type of line to be defined.
After tapping the button for a straight or curved seam the correspond-
Service Instructions 911-211 - 02.0 - 10/2016
•
Seamless path:
The clamps move over this path to the next position without sewing.
•
Straight seam:
A straight path is sewn.
•
Curved seam:
A curve is sewn.
ing window for entering the seam parameters for this path opens.
Coordinate-Range
X -150 to X 230
Y 90,1 to Y -92,6
X -150 to X 230
Y 100 to Y -100
X -150 to X 230
Y 100 to Y -100
110
Advertisement
Table of Contents
