Table of Contents
Advertisement
Machine head
Setting the position of the burner tip
Fig. 56: Setting the position of the burner tip
(1) - Screws
(2) - Burner tip
To set the position of the burner tip:
1. Loosen the screws (1).
2. Adjust the length of the burner tip (2).
3. Tighten the screws (1).
4. Use the screws (3) to make a height adjustment if necessary.
Service Instructions 911-211 - 02.0 - 10/2016
①
②
(3) - Screws
③
72
Advertisement
Table of Contents
