Setting The Sewing Foot Stroke - DURKOPP ADLER 669 ECO Operating Instructions Manual

38
To set the sewing foot pressure:
1. Set the sewing foot pressure using the adjusting wheel (1).
• Increase sewing foot pressure: turn clockwise
• Decrease sewing foot pressure: turn counterclockwise

Setting the sewing foot stroke

4.8.4
NOTICE
Property damage may occur!
It is not possible to set a lower sewing foot stroke on the right
adjusting wheel than on the left adjusting wheel.
Do not attempt to use force to set a smaller sewing foot
stroke on the right adjusting wheel.
Fig. 16: Setting the sewing foot stroke (1)
②
(1) - Adjusting wheel
(2) - Adjusting wheel
Use the adjusting wheel (2) on the left to select the standard
sewing foot stroke from1 to 9.
Use the adjusting wheel (1) on the right to set a higher sewing foot
stroke from 1 to 9.
①
(3) - Knee switch
Operating Instructions 669 - 00.0 - 08/2019
Operation
③