Setting The Foot Pressure (Foot Press.) Parameter; Setting The Needle Thread Tension (Thr.tens.) Parameter; Setting The Sewing Foot Stroke (Foot Stroke) Parameter - DURKOPP ADLER 867-M PREMIUM Service Instruction

Programming

20.4.2 Setting the foot pressure (Foot Press.) parameter

Foot pressure that should be set as standard when creating a new program.
To set the foot pressure parameter:
1. Select the Foot Press parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (01 - 20).
4. Press the OK button to confirm the value.

20.4.3 Setting the needle thread tension (Thr.Tens.) parameter

Needle thread tension that should be set as standard when creating a new
program.
To set the needle thread tension parameter:
1. Select the Thr.Tens. parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (01 – 99 %).
4. Press the OK button to confirm the value.
Information
The menu is expanded for 2-needle machines. It is then possible to set the
needle thread tension for the right and left sides.

20.4.4 Setting the sewing foot stroke (Foot Stroke) parameter

Sewing foot stroke that should be set as standard when creating a new
program.
To set the sewing foot stroke parameter:
1. Select the Foot Stroke parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (0.5 - 9.0).
4. Press the OK button to confirm the value.
104 Service Instructions 867-M PREMIUM - 02.0 - 02/2017