Table of Contents
Advertisement
Programming
The start screen
The start screen is displayed during sewing. When the machine is started,
the start screen is opened with the settings of the last sewing program
used.
Fig. 75: Start screen
(1) - Title bar
(2) - Status bar
(3) - Main window Display of the
(4) - Program bar
(5) - Menu bar: Popup menu
Structure of the start screen
Title bar (1)
This shows the version of the machine on the start screen. It also contains
information on the menu item currently selected in the various menus.
Status bar (2)
On the start screen, the sequence currently open is displayed here, and
the time of day (11) is displayed at the right. It also bar contains informa-
tion on the currently selected step in the various menus.
Main window (3)
The contour to be sewn is displayed here.
Program bar (4)
The seam programs of the sequence currently open are displayed here.
The program currently being executed is highlighted in black. The arrow
buttons (6) at the right side of the bar can be used to navigate along the
bar and display any additional programs that do not fit on the bar.
If a sequence is not currently open but rather only a single seam program
then this program fills the entire bar.
Service Instructions 911-211 - 02.0 - 10/2016
①
②
③
④
⑤
seam contour
(6) - Arrow buttons for navigating within the bar
(7) - Button for resetting the counter
(8) - Button for bobbin change
(9) - Display of the current seam parameters
(10) - Button for repair mode
(11) - Display of time
⑪
⑩
⑨
⑧
⑦
⑥
94
Advertisement
Table of Contents
