Creating Programs With Da-Cad 5000 - DURKOPP ADLER 911-211 Service Instructions Manual

Creating programs with DA-CAD 5000

7
You can use the DA CAD-5000 program to create seam programs on a
PC. The DA-CAD 5000 program is available as additional equipment.
This section only provides an overview of the program steps. A detailed de-
scription is provided in the  Operating Instructions for the DA-CAD 5000
program.
Selecting the class
The first step is to select the class.
Fig. 112: Selecting the class
Creating the seam contour
The next step is to draw the seam contour.
Fig. 113: Creating the seam contour
Service Instructions 911-211 - 02.0 - 10/2016
Creating programs with DA-CAD 5000
142