Setting The Foot Pressure (Foot Press.) Parameter; Setting The Needle Thread Tension (Thr.tens.) Parameter; Setting The Sewing Foot Stroke (Foot Stroke) Parameter - DURKOPP ADLER 869-M Premium Service Instructions Manual

Programming

19.5.2 Setting the Foot pressure (Foot Press.) parameter

Foot pressure that should be set as standard when creating a new program.
To set the Foot pressure parameter:
1. Select the Foot Press. parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (01 – 20).
4. Press the OK button to confirm the value.

19.5.3 Setting the Needle thread tension (Thr.Tens.) parameter

Needle thread tension that should be set as standard when creating a new
program.
To set the Needle thread tension parameter:
1. Select the Thr.Tens. parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (01 – 99 %).
4. Press the OK button to confirm the value.
Information
The menu is expanded for 2-needle machines. It is then possible to set
the needle thread tension for the right and left sides.

19.5.4 Setting the Sewing foot stroke (Foot Stroke) parameter

Sewing foot stroke that should be set as standard when creating a new
program.
To set the Sewing foot stroke parameter:
1. Select the Foot Stroke parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (0.5 – 9.0).
4. Press the OK button to confirm the value.
Service Instructions 869-M PREMIUM - 00.0 - 07/2018 95