Stihl MS 362 Manual page 75

: Pull the wires out of the guides
(arrows).
1
: Take out the screws (arrows).
: Remove the air guide shroud (1)
and turn it to one side.
2
1
: Take the wire (1) with insulating
tube (2) out of the guides
(arrows).
74
2
: Pull the handle heating wire (1)
out of the insulating tube (2).
1
: Pull the wiring harness through
the rubber grommet (1) and out of
the air guide shroud.
2
1
: Pull the wire (1) out of the
insulating tube (2).
– Remove the handlebar.
1
: Pull off the plastic sleeve (2).
: Take out the screw (1).
1
: Pull out the handlebar
stiffener (1).
– Check the stiffener and
handlebar and replace if
necessary.
– Test the handle heating system,
b 13.7.1
– Push on the plastic sleeve.
– Reassemble in the reverse
sequence.
2
1
MS 362, MS 362 C