Pins - Stihl MS 362 Manual

5.6

Pins

The anchor pins secure the springs.
Worn pins must be replaced.
– The springs may otherwise
become detached and pop out.
The pins must be driven home
squarely.
For greater clarity, all parts have
been removed from the pins in the
following illustrations.
2 3 1
4
: Use suitable tool to remove the
pins (1 - 6).
Pin 6 is fitted only on machines with
QuickStop Super.
MS 362, MS 362 C
Installing
– Before installing the new pin, coat
its knurled shank with
threadlocking adhesive, b 15
6
: Position the new pin in the bore
(arrow) so that the knurling on the
pin meshes with the existing
knurling in the bore.
5
Turn pin back and forth as
necessary.
The pins must be driven home
squarely.
2
: Drive home the pins (1 and 2) as
shown in the illustrations.
: Pin (1) a = about 2.9...3.3 mm
Pin (2) b = about 4.3...4.7 mm
3
4
: Drive home pins (3, 4 and 5) as
specified below.
1
: Pin (3) a = about 9.6...9.8 mm
Pin (4) b = about 4.6...4.8 mm
Pin (5) c = about 5.1...5.3 mm
a
1
2
b
5
a
4
3
5
c
b
29