Nortel 4500 Series Overview-System Configuration page 96

96 Basic configuration tasks
Retrieving a binary configuration file
To retrieve a binary configuration file from a TFTP server, perform the
following procedure.
Step
1
2
3
4
5
6
7
8
Saving the current configuration
The configuration currently in use on a switch is regularly saved to the flash
memory automatically. However, you can manually initiate this process
using the Save Configuration tab.
Copyright © 2007, Nortel Networks
.
Action
Open the FileSystem screen by selecting Edit > File System from
the JDM menu.
Select the Config/Image/Diag file tab. This tab is illustrated in
Device Manager File System screen" (page
If you retrieve the file from a USB storage device, skip this step;
otherwise, if a default TFTP server is not already specified (or
another TFTP server is to be used), enter the IP address of the
TFTP server to use in the LoadServerAddr field.
In the BinaryConfigFilename field, enter the name of the
configuration file to retrieve.
If the configuration file to be retrieved to a member of a stack, enter
the stack unit number in the BinaryConfigUnitNumber field. If it
is a stand-alone unit, specify 0.
If you retrieve the configuration file from a USB storage device,
enter the stack unit number in which the USB device is inserted in
the UsbTargetUnit field.
In the Action field, select dnldConfig to download the file from a
TFTP server or dnldConfigFromUsb to download the file from a
USB storage device.
Click Apply.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
—End—
84).
—End—
"Java
Nortel Networks Confidential