Device Manager Interface Components - Nortel 4500 Series Overview-System Configuration

42 4500 Series user interfaces

Device Manager interface components

The Java Device Manager application comprises several user interface
components. This section highlights those components and their use in
the application.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
Menu bar
Use the menu bar to set up and operate Device Manager.
The following table
bar commands.
Menu bar commands
Command
Device
Copyright © 2007, Nortel Networks
.
the IP address of the switch from the list. Be aware that using Device
> Open Last by SNMPv3 enables any switch user to access SNMPv3
devices.
"Menu bar" (page 42)
"Toolbar" (page 43)
"Device view" (page 44)
LEDs and ports
"Shortcut menus" (page 47)
"Status bar" (page 48)
"Using the buttons in Device Manager screens" (page 48)
"Editing objects" (page 49)
"Telnet session to a switch" (page 55)
"Opening an SSH connection to the switch" (page 55)
"Trap log" (page 55)
"Accessing the Web-based Management Interface" (page 56)
"Device Manager Online Help" (page 56)
"Menu bar commands" (page 42)
Description
Open a device, refresh the device view, rediscover a
device, and set the polling and SNMP properties. Use this
menu to open and view the Trap Log, SysLog, and Log.
Establish a Telnet or SSH connection to the device that
is currently open.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
describes the Menu
Nortel Networks Confidential